# "Insufficient SOL balance to cover priority fee": what it means and the fix

> “Insufficient SOL balance to cover priority fee” means the wallet paying for the transaction does not hold enough SOL for the network fee, the priority fee on top of it, any new account the move opens, and the minimum the wallet itself has to keep. Add a little SOL to that wallet, or lower the priority fee, and send it again. Nothing was taken: a transaction the wallet cannot pay for never runs.

Page: https://ravenwallet.pro/blog/insufficient-sol-for-fees
Updated: 2026-11-13

## What "Insufficient SOL balance to cover priority fee" means

Every Solana transaction is paid for in SOL by one wallet, the fee payer. Holding other coins does not help. Phantom's help centre says it plainly: holding other tokens on the network does not cover the fee, so sending USDC on Solana still needs SOL.

The fee payer has to cover up to four things at once:

1. **The base fee:** 5,000 lamports (0.000005 SOL) per signature.
2. **The priority fee:** whatever the wallet or app added to get in faster.
3. **Rent for any new account** the transaction opens, such as a token account for a coin you have never held.
4. **The wallet's own minimum:** after the transaction, the wallet must hold at least the rent minimum, or exactly zero.

When the message names the priority fee, usually an app or a custom setting asked for a bigger priority fee than the wallet can afford. A lamport is a billionth of a SOL.

## The exact errors behind it

Apps word it differently, but underneath it is one of these:

| Message | Where it comes from | What it means | Fix |
| --- | --- | --- | --- |
| Insufficient funds for fee | Solana runtime (`InsufficientFundsForFee`) | The fee payer cannot cover the base fee plus the priority fee | Add SOL or lower the priority fee |
| Attempt to debit an account but found no record of a prior credit. | Solana runtime (`AccountNotFound`) | The fee payer holds 0 SOL; to the network the wallet does not exist yet | Send SOL to that wallet first |
| Transaction results in an account (0) with insufficient funds for rent | Solana runtime (`InsufficientFundsForRent`) | Paying would leave the wallet above zero but below its rent minimum. Account 0 is the fee payer | Leave the minimum, or send everything to zero |
| Transfer: insufficient lamports X, need Y, then custom program error: 0x1 | System program (`ResultWithNegativeLamports`) | You tried to send more SOL than is left after the fee | Send a little less, or use Max |
| Insufficient funds for either swap amount, transaction fees or rent fees | Jupiter, error 6024 | A swap needs more SOL than the wallet holds | Lower the swap amount or add SOL |
| Not Enough SOL, or Insufficient SOL | Phantom | No SOL for the network fee | Add SOL, or use a gasless send or swap |
| Insufficient SOL balance to pay for transaction fees, or Insufficient funds to cover required network fee and minimum rent exemption | Trust Wallet | Fee plus the wallet's minimum is more than you have | Add SOL, or send a little less |

_Runtime and System program messages are from the Agave and Solana SDK source; app messages from Phantom's and Trust Wallet's help pages and Jupiter's developer docs, 13 November 2026._

## How much SOL does a wallet actually need?

A worked example with today's numbers. Rent is 5,080 lamports per byte, step 2 of the SIMD-0437 rent cut; the later steps were not live on mainnet this week. Every account adds 128 bytes of overhead to its data.

Say you buy a coin you have never held, with a modest priority fee: the app asks for 200,000 compute units at 50,000 micro-lamports each.

| Part | Working | Lamports | SOL |
| --- | --- | --- | --- |
| Base fee | 1 signature × 5,000 | 5,000 | 0.000005 |
| Priority fee | 200,000 × 50,000 micro-lamports ÷ 1,000,000 | 10,000 | 0.00001 |
| New token account (rent) | (165 + 128 bytes) × 5,080 | 1,488,440 | 0.00148844 |
| Wallet minimum left behind | (0 + 128 bytes) × 5,080 | 650,240 | 0.00065024 |
| **Total on top of the swap** | | **2,153,680** | **0.00215368** |

_Formulas from Solana's fee docs and SIMD-0437. The token account deposit comes back when you close it; see [Solana rent explained](/blog/solana-rent-explained)._

So spending 0.1 SOL on a new coin needs about 0.1022 SOL, not 0.100005. The fee is tiny. The new token account's deposit and the 650,240 lamports the wallet must keep are what catch people out.

Now change one number. If the priority fee is set to 0.005 SOL, which Phantom's custom setting allows (anywhere from 0.00001 SOL to 1 SOL), the same buy needs about 0.00714 SOL on top of the swap. A wallet with 0.004 SOL spare fails on the priority fee alone, even though the base fee is only 0.000005 SOL.

The priority fee is charged on the compute units the transaction asks for, not what it uses, so an app that asks for Solana's maximum of 1,400,000 units at the same 50,000 micro-lamport price pays 70,000 lamports instead of 10,000. See the [live priority fee tracker](/tools/solana-priority-fee-tracker) for what recent blocks are taking.

## How to fix it

1. **Send SOL to the wallet that pays**, from an exchange or another wallet.
2. **Lower the priority fee.** In Phantom, open the swap settings icon in the upper right of the swap screen and set the priority fee back to automatic, or lower your custom amount. In a trading app, check its fee or priority setting.
3. **Send a little less.** If you are sending SOL, use Max, or leave room for the fee. Phantom suggests reducing the amount so enough remains.
4. **Send everything instead of almost everything.** A wallet can go to exactly zero. What it cannot do is end between zero and 650,240 lamports.
5. **Use a gasless move.** Phantom says eligible sends and swaps on Solana can go through without enough SOL, the fee taken from the token you use. The token must be verified, the move worth at least $0.30, and gasless swaps are not available with a manual priority fee (tip). So a custom priority fee can switch off the thing that would have saved you.

## How much SOL to keep

Phantom suggests keeping 0.02 SOL and Trust Wallet 0.01 to 0.05 SOL. Those are suggestions, not network rules. The working above says one first buy needs about 0.0022 SOL on top of the swap, and each new coin adds another 0.00149 SOL deposit until its account is closed, so 0.02 SOL covers about 12 first buys plus their fees.

## Did I lose SOL?

No. If the fee payer cannot pay, the network does not run the transaction, so nothing is taken. A transaction that lands and then fails is different: Solana's docs say its fee is still charged. See [why a Solana transaction failed](/blog/solana-transaction-failed).

## Fees across many wallets

With many wallets, one empty wallet stalls a whole batch. Raven has a gas wallet: one wallet pays the network fees for the others, and every fee is its own line on the review before you sign. Raven is open to everyone: [open Raven](https://app.ravenwallet.pro/) and make an account. See [about Raven](/about).

## Questions

### Why do I need SOL to send USDC or another coin?

Solana charges every transaction in SOL, whatever coin it moves. The only exception is a gasless move, where a wallet such as Phantom takes the fee out of the coin itself.

### Why can't I send my last 0.0005 SOL?

A wallet has to hold at least 650,240 lamports (0.00065 SOL) or exactly zero. A send that would leave it in between is refused. Send everything with Max instead.

### Does a higher priority fee fix this error?

No, it makes it worse. A higher priority fee costs more SOL. Lower it or add SOL; raise it only when transactions are expiring on a busy network.

## Sources

- [Solana docs: Fees](https://solana.com/docs/core/fees)
- [Solana SDK source: transaction error messages](https://github.com/anza-xyz/solana-sdk/blob/master/transaction-error/src/lib.rs)
- [Agave source: fee payer checks](https://github.com/anza-xyz/agave/blob/master/svm/src/account_loader.rs)
- [SIMD-0437: Incremental rent reduction](https://github.com/solana-foundation/solana-improvement-documents/blob/main/proposals/0437-incremental-rent-reduction.md)
- [Phantom help: Not enough native tokens to pay network fees](https://help.phantom.com/hc/en-us/articles/30698882147859)
- [Phantom help: Gasless transactions on Solana](https://help.phantom.com/hc/en-us/articles/41191481594643)
- [Phantom help: Adjust swap settings](https://help.phantom.com/hc/en-us/articles/27085326202515)
- [Trust Wallet: Fund your Solana account and avoid failures](https://trustwallet.com/blog/academy/how-to-fund-your-solana-account-and-avoid-transaction-failures)
