# Using a Ledger with Solana: Phantom, Solflare and what to check

> Install the Solana app on your Ledger, close Ledger Wallet (Ledger Live), and connect the device in Phantom or Solflare. The key stays on the Ledger and every transaction is approved on it. If the address you see does not match the one you funded, the app is reading a different derivation path, and your SOL is still there.

Page: https://ravenwallet.pro/blog/ledger-solana
Updated: 2026-11-15

## The short version

A Ledger works with Solana in three ways: in Ledger's own app (now called Ledger Wallet, formerly Ledger Live), in Phantom, or in Solflare. Ledger's own Solana page says you can stake SOL and manage SPL tokens in its app, and that you can connect the device to software wallets such as Phantom and Solflare.

In every case the private key stays on the device. Phantom or Solflare only shows your accounts and builds the transaction. Nothing is sent until you approve it on the Ledger.

Before you start, in any app:

- Update the Ledger's firmware and its Solana app.
- Close Ledger Wallet. Phantom and Solflare both ask for this, and Phantom says it can block the connection.
- Use a USB cable that carries data. Phantom notes that charge-only cables do not work.

Get each app only from its official page: [Ledger Wallet](https://shop.ledger.com/pages/ledger-wallet), [Phantom](https://phantom.com/download) and [Solflare](https://solflare.com/).

## Ledger with Phantom

In the Phantom browser extension:

1. Plug in and unlock the Ledger.
2. Open Phantom, click your avatar in the top left, choose Add Account, then Connect Hardware Wallet. On a fresh install, choose Create a New Wallet, then Connect Hardware Wallet.
3. Click Connect when Phantom finds the device, and select your Ledger.
4. Choose Solana and open the Solana app on the Ledger when asked.
5. Go back to Phantom. Your Ledger accounts are listed there.

To send or swap, keep the Ledger plugged in and unlocked with the Solana app open. Phantom broadcasts the transaction only after you approve it on the device.

On a phone, Phantom connects over Bluetooth. Its supported list names the Nano X, Stax and Flex for the mobile app, and says the Nano Gen5 is not supported. Phantom asks you to keep the Ledger unlocked on its home screen, with no app open, while it connects.

Two Phantom limits: perps are not available on Ledger accounts, and Phantom lists Trezor and Tangem as unsupported.

## Ledger with Solflare

1. Plug in the Ledger, enter your PIN and open the Solana app until it says "Application is ready".
2. In Solflare, choose Ledger (new users find it under "Or continue with", existing users under Connect hardware wallet).
3. Pick your Ledger in the browser's prompt and click Connect.
4. Choose the derivation path that holds your SOL and click Continue.
5. Turn on blind signing in the Ledger's Solana app if you need it (more below).

Solflare's step 4 is the one that differs from Phantom. It shows you the paths and lets you pick. Its docs say that if your funds do not appear, go back and try another path.

## Why your Ledger address looks different

This is the most common Ledger and Solana question. Your Ledger has one recovery phrase, but that phrase can make many Solana addresses. Which one an app shows depends on the derivation path it reads. Ledger Wallet, Phantom and Solflare do not all start in the same place.

What Phantom says it does with a Ledger:

| What Phantom checks | Solana path | When |
| --- | --- | --- |
| The first account it finds | `m/44'/501'` | Always |
| Later accounts | bip44Change pattern | Always |
| Ledger Live accounts | one per index, such as `m/44'/501'/0'` | Only if it finds past activity |

_From Phantom's help page on derivation paths, November 2026._

So if you made and funded an account in Ledger Wallet, then connect the same Ledger to Phantom, Phantom should find that account as long as it has activity. A brand new, empty Ledger Wallet account may not show up. Solflare lets you choose the path yourself.

If the address does not match:

1. **Compare the full address**, not just the first few letters, with the one in Ledger Wallet or on a block explorer.
2. **In Solflare, try another path** on the import screen.
3. **In Phantom, check that the account has activity.** Phantom only looks for Ledger Live paths when there is some.
4. **Do not move anything** until you have found the address that holds your SOL. Coins on an address you cannot see in one app are still on chain.

The full picture of paths across wallets is in [Solana derivation paths explained](/blog/solana-derivation-paths).

## Blind signing: when to turn it on

A Ledger can only show simple Solana transactions in full, such as a plain transfer. Ledger's developer docs say that for other instructions, blind signing is most likely required. Solflare says it must be on to sign SPL token transfers and smart contract transactions. In practice that covers most swaps and staking from Phantom or Solflare.

You turn it on in the Ledger's Solana app, under Settings. Phantom's wording is "Blind signing > Enabled"; Solflare's is "Allow blind signing".

Ledger defines blind signing as approving a transaction without being able to check its full details. It warns that you might give a smart contract broad control over your assets, or send funds somewhere you never meant to. So:

- Approve only transactions you started yourself, on a site you trust.
- Read the details in Phantom or Solflare before you press the button on the device.
- Turn blind signing off when you are done. Solflare notes that Ledger recommends this, and that firmware and Solana app updates switch it off by themselves.

## What to never do

- **Never type your Ledger's recovery phrase into Phantom, Solflare, a website or any app.** Phantom says this plainly, and its support will never ask for it. A Ledger account is added by connecting the device, not by importing words. Words typed into an app are no longer protected by the Ledger.
- **Do not download Ledger Wallet, Phantom or Solflare from an ad** or a link someone sent you. Use the official pages above.
- **Keep the Ledger for money you rarely move.** Phantom and the Ledger protect the key, not your judgement about what you sign. Our [guide to wallet drainers](/blog/solana-wallet-drainers) shows what a bad request looks like.

## Where Raven fits

A Ledger is the vault. If you also trade, split funds or run many wallets, keep those as separate hot wallets with their own phrase, never the Ledger's. [Raven](https://app.ravenwallet.pro/) runs many Solana wallets in one place, with one review before anything is signed. Its keys are made and locked in your browser. Raven is open to everyone: open the app and make an account. More on the [about page](/about).

## Questions

### Can I use the same Ledger in Phantom and Solflare?

Yes. The key stays on the Ledger, so you can connect it to both. Check that each app shows the same address before you send anything to it, since they may read different paths.

### Why does Phantom show a different address than Ledger Wallet?

Phantom starts at `m/44'/501'` and looks for Ledger Live accounts only when it finds past activity on them. Compare the full address and see the path section above.

### Do I need blind signing for Solana on a Ledger?

For a plain SOL transfer, often not. For SPL token transfers, swaps and most apps, yes. Turn it on only when you need it and off afterwards.

### Can I trade perps in Phantom with a Ledger?

No. Phantom's help centre says perps are not available on Ledger wallets.

## Sources

- [Phantom help: Use a Ledger wallet with the Phantom browser extension](https://help.phantom.com/hc/en-us/articles/4406388670483)
- [Phantom help: Supported hardware wallets](https://help.phantom.com/hc/en-us/articles/46593089236627)
- [Phantom help: Derivation paths in Phantom](https://help.phantom.com/hc/en-us/articles/12988493966227)
- [Phantom help: Trade perps in Phantom](https://help.phantom.com/articles/42292249388307)
- [Solflare docs: Import your Ledger device](https://docs.solflare.com/solflare/onboarding/web-app-and-extension/import-your-ledger-device)
- [Ledger developer docs: Solana signer](https://developers.ledger.com/docs/device-interaction/references/signers/solana)
- [Ledger Academy: Blind signing](https://www.ledger.com/academy/glossary/blind-signing)
- [Ledger: Solana wallet](https://www.ledger.com/coin/wallet/solana)
